Sample Build: Dual Micro Coil .32 Gauge

Here is a sample micro coil cotton build.. .

32 gauge Kanthal wire wrapped on 2.4mm flat head screw driver vertically position on each side of poles firing at .5 ohmz. Cotton is placed over and between the poles for maximum juice capacity :D.

Flavor and throat hit is good but make sure to always make the coil soaking wet with your favorite ejuice. DO NOT DRY BURN. If you want to dry burn make sure to remove the cotton first. Every morning I always replace cotton.

Dual Micro Coil .32 Gauge Sample Build

Just wanna share you my sample micro coil cotton build :D

Materials used:

.32 Gauge Kanthal Wire

2 Pins

Unbleached sterile cotton

Note: Use pins to guide it to the positive and negative poles, make necessary adjustments and alignments before locking it in the atomizer. Then remove the pins.

Specs:

10 wraps of .32 gauge kanthal on each pin

Resistance is around .7 to 1 Ohms

Note: The coils are positioned on top of the cotton. Use a flat head screwdriver to push the cotton under the coils, use more cotton around the juice well of the atomizer to avoid leakage of juice.